The animatronic winding dragon is often placed as the vanguard in the most conspicuous place. It is used on the tip of the knife as pork belly. The animatronic winding dragon is taller than the conventional dinosaur. The necks of Mamenchisaurus and Lianglongs are very flat, not as tall as those of meandering dragons. During the exhibition, people can see the winding dragon at a glance far away. It is almost the same as the hot pot meat on the dining table. Today I will talk about the production method of the animatronic meandering dragon.
Production method of animatronic meandering dragon: 1. Determine the size of the meandering dragon, especially the height, and calculate the length of its neck by the height ratio.
2.Because the height is too high, the function of going to the head must be made, because if the height is too high, it cannot be transported on the road. Be sure to find a good head connection point.
3. Chassis making. The animatronic meandering dragon is a four-footed walking dinosaur. Although such a dinosaur has four points of support, it has a large body and its chassis is very particular about materials.
4. The frame material must use the national standard 403 stainless steel material. Only this kind of material can make it safe to use and have a longer service life.
5. The outer meandering dragon skin should be made of real foam, which has good elasticity and fire resistance.
6, the surface pigment should use waterproof paint, this paint is not afraid of the sun, not afraid of water.
7, so that the winding dragon’s neck and body can be separated.
8. Add sound and motion systems.
9. Connect the power supply for debugging.
10. Packing truck delivery.
A large animatronic dinosaur meandering dragon was completed through the above steps. Of course, the production method of different size meandering dragons is slightly different, but it is roughly the same. I hope that my friends can have a deeper understanding of the Jurassic exhibition.