Dinosaur skeleton | Dinosaur model failure solution, dinosaur model in daily use or improper operation, it is prone to various failures. Unlike other amusement equipment, the problem is different. The dinosaur model has a problem. You can find out where the problem is.

Dinosaur model failure solution

Dinosaur model failure solution

1.The model is not powered

If you are not sure what is the cause of the fault, you can use the exclusion method to check whether the power is normal, then check whether there is a problem with the plug-in wiring, and finally check whether the fuse in the dinosaur model distribution box is normal. Black means that the fuse is burnt out and you need to replace it with a new one.

Animatronic Dinosaur model failure solution

Animatronic Dinosaur model failure solution

2.Dinosaur model was scratched

(1) Needle stitch can be directly stitched if the nick is less than 5cm, and then paste with silicone.

(2) If the slit is larger than 5cm, first brush a layer of silicone, then cut and glue the elastic socks on it, and then brush a layer of silicone;

3.Dinosaur surface fades

The fading of dinosaur models generally occurs in the third year of use. First, wash the faded parts without dirt. Then brush on a thin layer of glass glue, and then apply watercolor paint to the glass glue, and finally cover with a thin layer of glass glue, so that the fading problem of the dinosaur model can be solved.