Manufacturers of simulated dinosaurs share the production of simulated dinosaur seats. The production of simulated dinosaur mounts is a product that many scenic area, amusement park, and mall operators like very much. Not only can they print a lot of popularity, they can also generate revenue for their own business.
First, the physical load should meet the needs of consumers aged 5-18, and the minimum load is not less than 150 kg. The maximum height is controlled below 2 meters, and the maximum range of motion is controlled within 30 degrees safety standards.
2. The steel frame used to make a dinosaur mount should use the national standard. At the same time, it must meet the three high safety standards of high load, high strength and high torque during use, and it must be free of sharp objects.
3. For the production of internal cables, we use regular suppliers that have passed the inspection. At the same time, copper (aluminum) core wires that need to pass the national quality inspection are used to avoid short circuits due to internal cable quality problems.
4. The epidermis used in the production of dinosaur mounts should be selected as the acidic non-toxic silicone collagen material as a safety standard. The toxic gas should be evaporated after half a month from the factory